Projector Edge Blending Processors Matrix Function

• Each box has 1-4 processing modules.

         - M811: Single module processor

         - M812: Dual module processor

         - M813: Triple module processor

         - M814: Quad module processor

• Each processing module includes:

         - Input: 2x HDMI2.0b, 1x DP1.2a and 1x VGA

         - Output: 1x HDMI1.4

          - Loop output: 1x HDMI2.0b for daisy chain connection.

• HDCP compliance: Input: HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3, Output: HDCP V1.4.
• input resolution: 7680*2160 30Hz, 7680*1200 @60Hz, 4096*2160 60Hz
• Input supports progressive and interlaced RGB/YUV signal, 4:4:4 Chroma sampling, up to 30 Color bits.
• Support non-VESA standard input timings for easy connection with various signal sources.
• 15 selectable Outputs: HDMI1.4 up to WUXGA, 2048*1080/60, progressive 4:4:4 RGB.
• 2 frames system latency: 33ms (@V=60Hz)
• Warp engine for geometry alignment up to 17*9 control points in IR control and GCT PC Tool.
• 120x68 grid pixel position fine-tune. Each control point can be adjusted with 1/4 pixel/step and moved up to 12.5 pixels adjustment range. Maximum adjusting points are 100 points.
• Geometry adjustment range up to 600 pixels in both H&V directions.
• Edge blending at 4 edges up to H=1920 pixels, V=1200 pixels with independent RGB gamma correction.
• 9 regions black level uplift to compensate light leakage from projector optical system.
• Edge Mask following the result of geometry alignment up to 500 pixels.
• Edge Mask with 8 control points up to 900 pixels in H&V directions at each control point.
• Support “W” type Corner Wall adjustment in horizontal and V type in vertical direction. The maximum adjusting range is 1200 pixels.
• Support Linearity Grid Line adjustment for quick H&V line position alignment.
• Embedded video wall function for image split, cropping and edge blend overlapped pixel setting.
• Selectable grid pattern size from 8-120 pixels in H&V direction. Default is 32*32 pixels.
• Selectable grid pattern color with optional transparency to see background image for external pattern.
• Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels position shift.
• 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine.
• 3D motion adaptive de-interlace.
• Frame lock function to get perfect synchronized outputs in all channels.
• Free-run mode provides continuous signal to output, no source searching required in projector when input source change.
• Support xvYCC & 8/10/12-bit deep color processing.
• Support High Dynamic Range (HDR) input signal and convert to SDR in the output.
• Individual color and white balance adjustment in each processing channel.
• Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment in each channel up to 4k/60 input.
• PIP/POP function with PIP image size from 320*180 up to 1920*1200 resolution with flexible position and adjustable aspect ratio. This function is not available when the main image is 90/270 degrees rotation.
• Selectable and programmable EDID in the range: H=1024-3840, V=720-2400.
• User can save up to 5 settings and can be recalled by remote controller, RS232, USB or network.
• ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
• Working environment: 45〫C, 10-90% RH
• Control: keypads, IR, RS232, USB, Ethernet
• Save up to 5 system settings. System settings can be stored and backup in PC.
• Power supply: DC: 12V 3.3A
• Power consumption:

          M811: 8.4W, M812: 14.4W, M813: 21.6W, M814: 28.8W

• Dimensions (Body only):

         Without protruding parts: M811: 303mm*164mm*44mm, M812-M814: 440mm*190mm*58mm.

         With protruding parts: M811: 303mm*175mm*55mm, M812-M814: 440mm*201mm*69mm

• Weight (Body only): M811: 1.5kg, M812: 2.5kg, M813: 2.6kg, M814: 2.8kg
• CE/FCC/RoHS Certified