Scaling Presentation Switcher
The CR-MAX02A is a 4 input presentation scaling switcher consisting of 2 HDMI, 1 VGA/Analogue iand 1 USB-C nputs with HDMI and HDBaseT PoC (power over cable) output, removing the need for a power supply at the receiver end. The output resolution can be set from 1080p to 4K
Two separate stereo audio inputs are also available along with a mic input with 48v and line input switch. Desembeded audio fuction. There is also a HDBaseT output and local IR device control. Bi-directional RS232, TCP/IP and 2 way IR is transmitted over the HDBaseT output to the CR-HDBT02RX receiver. HDBaseT supports PoC (power over cable) technology removing the need for a power supply at the receiver end. The audio section also features audio embedding and de-embedding for added flexibility.
- Incorporate HDBaseT Technology
- HDMI 2.0 version support 4K@60Hz YUV4:4:4, 18G, HDR10
- Support 1x VGA, 1x Type-C, 2x HDMI input
- Support 1x HDMI and HDBT output simultaneously
- Transmit up to 70m under 1080p@60Hz, 40m under 4K@60Hz
- HDCP 2.2/1.4 compliant
- Audio sampling rate upto 192KHz,support max 7.1CH
- Support Analog audio embedded, Mic input
- Support Analog/SPDIF audio extraction, analog output support PCM2.0,SPDIF output support Dolby, DTS, max 5.1CH
- With wide-band Bi-Direction IR routed control(38~56KHz), IR extend to control device
- Support RS232 pass through
- Support micro USB port for firmware upgrade
- Support Panel Button with LCD, IR Routing, RS232, TCP/IP, PC Tool Control
- Support POC (receiver powered by HDBaseT switch)
- DC 24V/1A power supply
Data sheet
- Commutation
- Selectors